(this will be maintained on http://www.fasor.com/~iso25/bibliography_of_uncertainty.htm )

Analysis for Engineeers". 2nd. ed. John Wiley & Sons, 1999, ISBN 0-471-12146-0

ANSI/ASME US Standard Z540-2, NCSL, Boulder CO, 1998

ASME PTC 19.1, "Measurement Uncertainty, American Society of Mechanical Engineers", NY, 1985

C.F. Dietrich "Uncertainty, Calibration and Probability: The Statistics of Scientific and Industrial Measurements"

CEN/CENELEC, EN45001, "General criteria for the operation of testing laboratories", Brussels, 1989

D.A. Swyt, "Uncertainties in Dimensional Measurements Made at Nonstandard Temperatures", Volume 99, Number 1, Journal of Research of the NIST, 1994

Donaldson, Robert, "Error Budget", Chapter 3 of Large Optics Diamond Turning Machines, Lawrence Livermore National Laboratories, 1978

EAL-4/02, "Expression of the Uncertainty of Measurement in Calibration", EAL, 1999

Franz Adunka: "Messunsicherheiten, Theorie und Praxis", 1st ed. Vulkan Verlag, 1998, ISBN 3-8027-2186-1

GUM "Guide to the Expression of Uncertainty in Measurement" ISO, 1995

Hugh W. Coleman and W. Glenn Steele: "Experimentation and Uncertainty

ILAC, G8, "Guidelines on Assessment and Reporting of Compliance with Specification", International Laboratory Accreditation Committee, 1996

Intrinsic/Derived Standard Practice", July 1998. A complete error budget and uncertainty analysis is provided therein.

ISO TC 213, "Uncertainties of Dimensional Measurements Made at Temperatures Other Than 20 °C"., draft prepared by TSO TC 213 WG3, 1997

ISO TC-213 Working Group 3, "Uncertainties of Dimensional Measurements Made at Temperatures Other Than 20 ° C", Working Draft N60, 1995

ISO/IEC 17025, "General Requirements for the technical competence of testing laboratories", ISO, 1999

ISO/IEC Guide 43, "Development and Operation of Laboratory Proficiency Testing", ISO ,1984

ISO/IEC, IS0 10012-1, "Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation system for measuring equipment", ISO TC 176, 1992

ISO/TC 213, ISO/DIS 14253-1, Part 1: "Decision Rules for providing conformance or nonconformance with specification", ISO, Geneva,1998

ISO/TC 213, ISO/DIS 14253-2, Part 2: "Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification", ISO, Geneva,1998

John R. Taylor, "An Introduction to Error Analysis : The Study of Uncertainties in Physical Measurements"

NAMAS M3003, "The Expression of Uncertainty and Confidence in Measurement for Calibrations", NAMAS, England, 1995

NAMAS NIS 80, "Guide to the Expression of Uncertainties in Testing", NAMAS, England, 1994

NCSL RISP-4 "Deadweight Pressure Gauges Recommended

NCSL RP12, "Determining and Reporting Measurement Uncertainties, Recommended Practice" NCSL, Boulder CO, 1995

NF E 02-204, "Verification des tolerances des produits, Declaration de conformite", AFNOR, Paris, France, 1993

NIST Technical Note 1297, B.N. Taylor and C.E. Kuyatt, "Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results", NIST, 1994

NISTR 5170, S.D. Phillips, B. Borchardt, and G. Caskey, "Measurement Uncertainty Considerations for Coordinate Measuring Machines", NIST, 1993

NISTR 5698, S.D. Phillips, B. Borchardt, and W.T. Estler, :"The Estimation of Measurement Uncertainty of Small Circular Features Measured by CMMs", NIST, Gaithersburg, MD 20899, 1995

NISTR 89-4171, W.T. Estler, "Accuracy Analysis of the Space Shuttle Solid Rocket Motor Profile measuring Device", NIST, Gaithersburg, MD, 1989

R.B. Zipen, "The Risks due to Measurement Errors, American Society of Mechanical Engineers", Winter annual meeting, Phoenix, 1982

R.H. Williams and C.F. Hawkins, "The Economics of Guard Band Placement", Proceedings of the 24th IEEE International Test Conference, Baltimore, 1993

S.D. Phillips and W.T. Estler, "Calculation of Measurement Uncertainty using Prior Information", Draft, NIST, Gaithersburg, MD 20899, 1997

S.D. Phillips, K.R. Eberhardt, B. Parry, "Guidelines for Expressing the Uncertainty of Measurement Results Containing Uncorrected Bias", NIST Journal of Research, Institute of Standards and Technology, 1997

Salsbury, James G., "Uncertainty of the Coordinate Measurement Process Due to Unwanted Asperities", American Society for Precision Engineering, Volume 14, 1996

SINGAS Technical Guide 1, "Guidelines on the Evaluation and Expression of the Measurement Uncertainty", SINGAS, Singapore July 1995

T. Doiron and J. Stoup, "Uncertainty and Dimensional Calibrations", NIST Journal of Research, NIST, Gaithersburg, MD, 1997

T. Treib, IWF-ETHZ, "Error Budgeting - Applied to the Calculation and Optimization of the Volumetric Error Field of Multi-axis Systems", Vol. 36 Annals of the CIRP, 1987

10 May 2000